Question

I had quite much problems in adding a total column after changing to use EditRowPlugin (with EditTablePlugin it went easier). However, as I finally found my solution, I want to share if this helps someone else. This one solved my problem with the graphics in table, and also the summary (totals) row in the end. Here you are!

• Set DRAFTDOC = :Draft
• Set APPROVEDDOC = :Approved
• Set UPDATEDDOC = :Updated

Spec	Spec status	Responsibility
Design Spec 1	:Approved	Mike
Design Spec 2	:Updated	John
Unit testing Spec	:Approved	John
Module testing Spec	:Draft	Ann
System testing Spec	:Draft	Ann
Testing Report	:Draft	Mike
Totals	:Draft: 3 :Approved: 2 :Updated: 1	Ann: 2 John: 2 Mike: 2

Environment

-- HeikkiArtola - 10 Dec 2008

Answer

If you answer a question - or have a question you asked answered by someone - please remember to edit the page and set the status to answered. The status is in a drop-down list below the edit box.

The trick with the summary row succeeded by using

%EDITCELL{ }

-- HeikkiArtola - 10 Dec 2008

Thank you very much Heikki for sharing this with the TWikiCommunity!

-- PeterThoeny - 11 Dec 2008